| Customization: | Available |
|---|---|
| After-sales Service: | Online Support,Field Installation |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
After gypsum is extracted from mines or quarries, it is crushed and stockpiled as needed. If the gypsum ore's moisture content is greater than 0.5 weight percent, then the material requires drying.
Gypsum dryers system of our company mainly consists of a heating machine, conveyor, feeding part, cylinder dryer, discharging part, and dust collector, etc. And the gypsum dryer plant can process the phosphogypsum, sulfur gypsum, fgd gypsum, gypsum slag, gypsum sludge and other gypsum materials.
After drying, the moisture of gypsum can be ≤7%, and the particle size can be controlled below 8mm. And dried gypsum can be used in the wallboard manufacturing industry, and can be used as cement additives in the cement manufacturing industry, etc. Gypsum dryer of our company is an environmental machine with the features of reliable performance, low fault rate, stable operation, high efficiency and low electricity consumption.
The gypsum dryer is divided into the following working areas during the drying process:
1.In the material guiding working area, gypsum enters into the roller and fully contacts with the high temperature hot air here to evaporate water rapidly.
2.The cleaning area; The cleaning device and crushing device in the cleaning area can effectively clean and crush the materials sticking to the inner wall, thus increasing the heat exchange area and improving the drying efficiency.
3.Inclined material lifting area; where the gypsum has a low moisture and loose state, and after full heat exchange, it reaches the required moisture.
4.The discharging area; where the material rolls and slides to the discharge port to complete the whole drying process.
1. The gypsum dryer adopts the downstream drying technology, the flue gas and materials enter into the drum at the same side, with high thermal efficiency;
2. The gypsum dryer has the advantages of stable operation, strong processing capacity, low fuel consumption and low drying cost;
3. The new internal structure is adopted to strengthen the cleaning of materials and reduce the phenomenon of gypsum sticking to the wall;
4. According to the requirements of customers, the product size and moisture can be controlled. After drying, the moisture of gypsum can be ≤7%, and the particle size can be controlled below 8mm.
Gypsum Rotary Dryer Technical Parameter
|
Specification |
Capacity |
Initial Moisture |
Final Moisture |
Total Power |
Floor Area |
| DDMG1918 |
300±10 |
25±5 |
≤8 |
109 |
7m*25m |
|
DDMG2218 |
500±30 |
25±5 |
≤8 |
128 |
8m*30m |
|
DDMG2520 |
700±30 |
25±5 |
≤8 |
240 |
8m*30m |
|
DDMG2822 |
1000±30 |
25±5 |
≤8 |
400 |
8m*40m |
|
DDMG3024 |
1200±30 |
25±5 |
≤8 |
480 |
12m*50m |
|
DDMG3428 |
1500±30 |
25±5 |
≤8 |
600 |
12m*60m |
|
DDMG3830 |
1800±30 |
25±5 |
≤8 |
800 |
16m*70m |
|
DDMG4032 |
2000±30 |
25±5 |
≤8 |
1000 |
18m*70m |
|
DDMG4238 |
2500±30 |
25±5 |
≤8 |
1200 |
20m*80m |
){kind=link}